click to chat
Description
Key features
- Input impedance: 50 k Ohms, normal mode 1 M Ohm, common mode
- Input CMMR: 80 dB at 20 Hz, typical, 80 dB at 1 kHz, typical, 65 dB at 20 kHz, typical
- Damping Factor: 350 at 20 Hz, 8-Ohms, 254 at 1 kHz, 8-Ohms, 34 at 20 kHz, 8-Ohms, 7 at 200 kHz, 8-Ohms
- Crosstalk: Better than -115 dB at 1 kHz
- Better than -92 dB at 20 kHz
- Frequency response: Better than 0.1 Hz to 200 kHz, +0/-3 dB -0.01 dB at 20 Hz, -0.17 dB at 20 kHz, 8-Ohm Load -0.23 dB at 20 Hz, -0.32 dB at 20 kHz, 4-Ohm Load
- Input sensitivity: Low-Gain = 22 dBu (9.8 Vrms), Gain = 9.2 dB Mid-Gain = 14.2 dBu (4 Vrms), Gain = 17.0 dB High-Gain = 8.2 dBu (2 Vrms), Gain = 23 dB
Tech specs
Link producător:
Greutate produs
Non-Rack-Mount version: 5.66kg Rack-Mount version: 6.12kg
Dimensiuni produs
(W x H x D) Non-Rack-Mount version: 280.4 x 98.5 x 237.2mm Rack-mount: 482.6 x 98.5 x 269.7mm
Alte specificații
RMS power:
100 Watts per channel into 8 Ohms, both channels driven
130 Watts per channel into 6 Ohms, both channels driven
190 Watts per channel into 4 Ohms, both channels driven
240 Watts per channel into 3 Ohms, both channels driven
200 Watts into 16 Ohms, bridged mono
380 Watts into 8 Ohms, bridged mono
480 Watts into 6 Ohms, bridged mono
THD: < -119 dB (< 0.00011%), Stereo Mode < -120 dB (< 0.00010%), Mono Mode
Garanție (luni)
24
High-Resolution performance
Experience the emotion
The details and musical emotion are captured by the best High-Resolution-Audio recordings and can only be fully appreciated when each component in the chain is capable of high-resolution performance. Power amplifiers are the weak link in most audio systems. Most power amplifiers are suitable for the limitations of CD formats, but do not fit well with high-resolution formats. Contrary to these aspects, the revolutionary AHB2 was specially designed to deliver high-resolution performance
Speaker load easily controlled
Many loudspeakers have frequencies whose impedance drops to levels that are much lower than the nominal impedance. Most power amplifiers produce a greater amount of distortion when the load impedance drops. AHB2 produces almost immeasurable distortion under any load conditions.