Monitor Audio CP-WT380IDC In-Wall speaker

Out of stock
Monitor Audio SKU: : SCPWT380IDC
Free shipping
30 days return policty "no commment"
Warranty 24 months
3 INSTALLMENTS Alpha Bank
3 INSTALLMENTS BRD
3 INSTALLMENTS Banca Transilvania
3 INSTALLMENTS Card Avantaj
3 INSTALLMENTS Garanti Bank
Description

Key features

  • Built-in wall speaker, 3 ways
  • Speakers: 1 tweeter 2.5 cm + 1 x mid 10 cm + 1 x woofer 20 cm
  • Frequency response: 50 Hz – 30 kHz
  • Sensitivity: 89 dB (2.83V @ 1 m)
  • Nominal impedance: 6 ohm
  • Recommended amplification: 30 - 120 W
Tech specs

Greutate produs

5.62 kg

Alte specificații

Description: Built-in wall speaker, 3 ways
High speakers: 1 x 2.5 cm
Mid speakers: 1 x 10 cm
Bass Speakers: 1 x 20 cm
Frequency response: 50 Hz – 30 kHz
Sensitivity (2.83V/1m): 89 dB
Recommended power: 30 - 120 W
RMS power: 120 W
Nominal impedance: 6 ohms
Crossover frequency: 300 Hz / 3 kHz
Dimensions: Total Speaker: 472.5 x 303.5 mm
Speaker depth: 106 mm
Wall cutout: 438 x 269 mm
Installation depth: 99 mm
Other features: HF Level Switch (+3 dB / 0 dB / -3 dB)
MF Level Switch (+3 dB/ 0 dB/ -3 dB)
Boundary Compensation Switch (On / Off)
Speaker type: Wall/ceiling speakers

Garanție (luni)

24

General presentation Monitor Audio CP-WT380IDC In-Wall speakers

The CP series of in-wall speakers from Monitor Audio is highlighted by the fact that the speakers have their own closed enclosure and no longer interact with the space behind the wall, in this way the sound is more precise, more predictable, more evenly produced from all the installed speakers in the same room. Monitor Audio CP-WT380IDC is a built-in wall speaker, with its own closed enclosure, a 20 cm C-CAM RST mid-bass speaker and an IDC swivel module consisting of the 10 cm C-CAM RST Inverted mid speaker and the Gold tweeter 2.5 cm C-CAM, so the sound played is of high quality and has a good dispersion and a wide spectrum of frequencies. Installation of the speaker in the wall is easy with the help of the spring-loaded signal plugs and the Tri-Grip clamps designed for variable thicknesses of the false wall. Optimizing the sound scene in the audition place can be done by pivoting and orienting the IDC mode, by adjusting the level of the highs, but also of the mids (-3 dB, 0 dB, +3dB for each) and by compensating the edge effect "boundary compensation" (on /off). The ornamental grid covers the entire surface of the speaker and is very easily removable, being magnetically fixed.

Products for custom installations from Monitor Audio are designed for high performance, reliability and ease of operation. They have been developed using advanced technologies from award-winning hi-fi speakers to deliver superior sound quality without compromising on venue design:
- MMP II (Metal Matrix Polymer) diffusers with polypropylene cones loaded with metal particles.
- loudspeakers with C-CAM membrane (Ceramic Coated Aluminum Magnesium).
- Gold Dome C-CAM (Ceramic Coated Aluminum Magnesium) tweeters for maximum detail and finesse without distortion.
- IDC (Inverted Dual Concentric) swivel module consisting of a special medium speaker (RST Inverted) and a concentrically positioned tweeter, the module can be rotated in any direction (max. 18 degrees) to direct the sound flow towards the audition site. Only available on select models.
- compensation system (on/off switch) of the wall or ceiling effect - Boundary Compensation - to reduce distorted bass. Only available on select models.
- sound adjustment system in high frequencies (treble), switch with three positions: -3 dB, 0 dB, +3 dB. Only available on select models.

Have you looked at...